Epson 900N - Manual (Page 42)

35
See your NetWare manual for the available characters and
number of characters you can use.
4. Click the Print Server tab and make the following settings:
Primary file server name
Select the server where you created the queue.
Password
Type any new password up to 19 characters. The characters you enter appear as
“
∗ ”.
Print server name
Type any new name up to 47 characters. The default name consists of the printer
name and the last six digits of the Ethernet card’s serial number.
Polling interval
Set the polling time from 5 to 90 seconds.
5. Click OK to save your changes. If the message “Configuration is successfully
done” appears on your screen, the update is complete.
instconf.fm Page 35 Friday, February 19, 1999 4:00 PM