Epson 900N - Manual (Page 27)

20
* To use the Ethernet card home page, you must have TCP/IP setup on your network, as well as
either Microsoft Internet Explorer 4.0 or later, or Netscape Navigator TM 3.0 or later.
** If you have a Windows NT 4.0 Server network, you may need to install the driver only on the
server. See your Windows NT documentation.
DOS 6.22 Novell
NetWare,
Windows NT
Server,
Windows for
Workgroups DOS acts as a client only, you can’t use a DOS
workstation to monitor the printer.
Windows NT 4.0
(Service Pack 3,
or higher) TCP/IP 1. EPSON Net!2 (page 21)
2. EPSON Status Monitor 2 (page 23)
3. IP address for the Ethernet card (page 39)
4. Printer driver on each workstation** (page 49)
NetBEUI
(TCP/IP must
also be
installed) 1. EPSON Net!2 (page 21)
2. EPSON Status Monitor 2 (page 23)
3. IP address for the Ethernet card (page 39)
4. NetBEUI settings on the Ethernet card home
page* (page 46)
5. Printer driver on each workstation** (page 49)
Novell
NetWare 1. EPSON Net!2 (page 21 and page 33)
2. EPSON Status Monitor 2 (page 23)
3. Setup using NwAdmin (page 26) or PCONSOLE
( Administrator’s Manual , Chapter 4)
4. Printer driver on each workstation** (page 49)
Macintosh AppleTalk 1. EPSON Net!2 (page 21 and page 44)
2. Printer driver on each system (page 49)
UNIX TCP/IP (lpr,
ftp) 1. Install a printer driver and filter. (See your UNIX
documentation.)
2. Configure the printer for lpr or ftp.
( Administrator’s Manual, Chapter 9)
IBM OS/2 Warp NetBEUI Administrator’s Manual , Chapter 8
TCP/IP Administrator’s Manual , Chapter 8
Operating
system Network
protocol
What you need to install and configure
instconf.fm Page 20 Friday, February 19, 1999 4:00 PM