Epson 900N - Manual (Page 51)

44
Before you can print using TCP/IP, you still need to do the following on each
computer that will use the printer:
■
Install the printer driver (see page 49)
■
Add a printer port (see page 51)
See page 46 if you need to enable NetBEUI on the Ethernet card.
Configuring for AppleTalk
To use your printer on an AppleTalk network, you need to configure the Ethernet
card for AppleTalk.
Follow these steps to configure your card using EPSON Net!2:
1. Open the EPSON Net!2 utility.
You see a window like the following:
instconf.fm Page 44 Friday, February 19, 1999 4:00 PM