Epson 900N - Manual (Page 47)

40
Follow these steps to assign an IP address:
1. Make sure Windows is running, the Ethernet card is connected to the network,
and the printer is turned on.
2. Click Start , point to Programs , point to EPSON Net!2 , then click EPSON
Net!2 .
3. Click the printer where you want to set the IP address, and then click the
Configuration button.
If you have connected more than one printer with the same
type of Ethernet card to the network, you can distinguish the
cards by their MAC addresses. Press and hold the card’s
status sheet button for three seconds to print a status sheet
with the MAC address of the card.
click here
instconf.fm Page 40 Friday, February 19, 1999 4:00 PM