3 resetting the inverter – Magnum Energy MMS Series User Manual
Page 43
© 2014 Magnum Energy,
Inc.
Maintenance and Troubleshooting
37
4.3
Resetting the Inverter
Under some fault conditions (i.e., an internal fault), the inverter will
need to be reset.
To reset the inverter:
1. Press and hold the Power ON/OFF pushbutton for approximately
15 seconds, or until the Status LED comes on and fl ashes (see
Figure 18).
2. Release the Power ON/OFF pushbutton once the fl ashing has
begun. The Status LED will go off.
3. Press the Power ON/OFF pushbutton again to turn the
inverter on.
Info: The Power ON/OFF pushbutton is a small momentary
type switch which is operated by lightly pressing and
releasing.
Status LED
Indicator
Power ON/OFF
pushbutton
Figure 18, Resetting the Inverter