Ion Science Cub - Manual (Page 24)

CUB MANUAL Ion Science Ltd
Page 24 of 42
Unrivalled Detection. www.ionscience.com
CubPC software
The Firmware field displays the current version of the firmware installed on the dock, and contains a button
to upgrade it to the newest version (see Upgrading Firmware and Software).
Buttons displayed in the Purge field are for diagnostic use only.
Configuring a Cub
To configure a Cub, click the button on the Cub ’s page for that Cub. The following page is displayed:
Name
If required, enter a name for the Cub in this field.
Sensor
Displays the sensor type.
Units
The units of measurement may be chosen as parts per million (ppm) or milligrams per cubic metre (mg/m
3
).
Clock
Set the time and date and tick the checkbox to the right of these fields to set the time on your Cub.
Alternatively, tick the lower box to synchronise your Cub with the time on your computer.