Ion Science Cub - Manual (Page 19)

CUB MANUAL Ion Science Ltd
Page 19 of 42
Unrivalled Detection. www.ionscience.com
CubPC software
For each connected Cub, the following are displayed:

The Cub serial number

The Cub name (if one has been assigned using the configuration page)

The time and date that the Cub was last calibrated

The time and date of the last bump test

The time and date of the most recent data log received from the Cub

The current battery charge of the Cub

The current firmware version installed on the Cub
The Cub ’s page also includes, for each Cub, buttons to delete logged data, save logged data to CSV
files, open the Cub configuration page, view logged data, calibrate the Cub, perform bump tests and
update the Cub firmware.
The large buttons at the top of the screen provide the following facilities:
Opens the Cub ’s page, as described above.
Opens the Help page, which displays general information on the CubPC software and provides
access to technical support and documentation.
Opens the Preferences page, used to specify the actions taken when a Cub is connected to a
dock and history and calibration preferences.
Used to view details of the connected docks and perform purges and firmware updates.
Used browse back and forward through the CubPC pages you have viewed.
Used to close CubPC.
Additional data and facilities for a Cub can be accessed by clicking the + symbol next to the serial number of
that Cub. The additional details are then displayed: