Yaskawa Profibus-DP Option Card CM061 - Manual (Page 39)

Product Specification A-1
Appendix A Product Specification
This appendix describes the specification for the PROFIBUS-DP Option interface
card
Table A.1 – Product Specification
PROFIBUS-DP Option
Ambient Temperature -10 to +45 O C (14 to 113 O F)
Storage Temperature -20 to +60 O C (-4 to 140 O F)
Relative Humidity Not to exceed 90% RH (non-condensing)
Altitude Not to exceed 1000m (3280ft)
Vibration
1G (9.8m/s 2 ) at 10 to 20Hz.
0.2G (2m/s 2 ) at 20 to 50Hz.
PROFIBUS-DP Specification PROFIBUS-DP Slave- EN 50170
PROFIBUS-DP Profile Vendor-Specific, PNO-approved
Connector Type 6-pin open-style screw connector
Physical Layer Type Isolated Physical Layer (RS485 transceiver + photo-coupler)
Node Address Setting 2 Decimal Rotary Switches: address 1 to 99
Baud Rate Auto-configure: 9600 bps to 12 Mbps
ASIC Implementation SPC 3
Feature Support Freeze Mode, Sync Mode, Auto Baud