Yaskawa Varispeed-656 DC5 - Manual (Page 58)

E-48
7 SPECIFICATIONS
* Contact your YASKAWA representative. (Under development)
Voltage Class 200 V Class 400 V Class
Model CIMR-D5A† 2015 2022 2037 2055 * 2075 4015 4022 4030 4045 4075 4160 4300 *
Rating
Rated Capacity kW 20 30 50 75 90 20 30 40 60 100 185 370
Rated Output Current (DC) A 60 90 150 210 280 30 45 60 90 150 280 560
Rated Input Current (AC) A 64 96 160 224 300 32 48 64 96 165 300 600
Rated Output Voltage 330 VDC 660 VDC
In
put Po
wer
Suppl
y Voltage Frequency 200 to 220 VAC 50 Hz,
200 to 230VAC 60 Hz
380 to 460VAC 50/60Hz
Allowable Voltage Fluctuation +10% to -15%
Allowable Frequency
Fluctuation ±3 Hz/300 ms (Free phase rotation)
Control Cha
racte
risti
cs Control Method
Sine wave PWM method
Input Power Factor 0.95 or more (Rated current)
Output Voltage Accuracy ±5%
Overload Capacity Stops in 1 minute at approx. 150% of rated current.
Operation Input Digital Operator and external terminals
S
tatu
s Output
Fault 1NONC contact output
Running 1NO contact output
Minor Fault, etc. Multi-function PHC output: 2 points can be selected.
Analog Output Multi-function analog output: 2 points can be selected.
Constant Setting Using the Digital Operator
Protective Fu
ncti
on
Instantaneous Overcurrent Stops at approx. 200% of the VS-656DC5 input current.
Blown Fuse Motor stops by blown fuse.
Overload Stops after 1 minute at 150% of rated current (power running and regenerating).
Undervoltage (Output) Stops at approx. 190 VDC or less Stops at approx. 380 VDC or less.
Undervoltage (Input) Stops at approx. 150 VAC or less. Stops at approx. 300 VAC or less.
Overvoltage Stops at approx. 400 VDC or more. Stops at approx. 800 VDC or more.
Fin Overheat Protected by thermistor
Ground Fault Detection Protected by electronic circuit
Power Frequency Error Stops by fluctuation more than ±3 Hz of rated input frequency.
Power Charge Indication Indicated until main circuit output voltage is approx. 50 V or less.
En
vironmen
ta
l C
ondi
tions
Location Indoor (Protected from corrosive gases and dust)
Ambient Temperature -10 °C to +45 °C
Humidity 90% RH or less (non-condensing)
Vibration 9.8 m/s 2 (1 G) less than 20 Hz, up to 1.96 m/s 2 (0.2 G) at 20 to 50 Hz