1 receiving, 1 checks, 2 nameplate information – Yaskawa Varispeed-656 DC5 User Manual
Page 13: Nameplate example, Caution, 1receiving

1 RECEIVING
E-3
1
RECEIVING
This chapter describes how to verify the VS-656DC5 after delivery to the user.
1.1
Checks
If any of the above items are not satisfactory, contact your YASKAWA representative.
1.2
Nameplate Information
Nameplate Example
The following nameplate is an example for a standard domestic (Japan) VS-656DC5:
3-phase, 400 VAC, 30 kW, IEC IP00.
Fig. 1 Nameplate
• Do not install or operate any VS-656DC5 which is damaged or has missing parts.
Failure to observe this caution may result in personal injury or equipment damage.
CAUTION
Table 1 Checks
Item
Method
Does the VS-656DC5 model number
correspond with the purchase order?
Check the model number on the nameplate on the side of the
VS-656DC5. (Refer to page E-4.)
Are any parts damaged?
Visually check the exterior and verify that there was no dam-
age during transport.
Are any screws or other components loose?
Use a screwdriver or other tools to check for tightness.
YASKAWA ELECTRIC CORPORATION
MADE IN JAPAN
MODEL CIMR-D5A4030
OUTPUT DC660V
60A
INPUT
AC3PH
380 - 460V 50Hz
64A
380 - 460V 60Hz
SPEC
40300A
MASS: 33kg
SER NO
Converter Unit
model
Input Specification
Output Specification
LOT number
Mass
Serial No.
Converter
Unit
specifications