Yaskawa Varispeed-656 DC5 - Manual (Page 42)

E-32
4.3 Using the Digital Operator
This section describes the component names and functions of the Digital Operator. The com-
ponent names and functions are shown in Fig. 13 and Key functions are described in Table
8.
Fig. 13 Digital Operator Component Names and Functions
LOCAL
REMOTE
MENU
DIGITAL OPERATOR
JVOP-130
ESC
DATA
ENTER
JOG
FWD
REV RESET
DRIVE FWD REV REMOTE
SEQ REF
RUN STOP
U1-01 = 330 V
Output V Command
Operation Mode Display
DRIVE: Lit when in operation mode.
FWD: Not used.
REV: Not used.
SEQ: Lit when the run command from the
control circuit terminal is enabled.
REF: Not used.
Data Display
Tow-line LCD that displays data for monitoring,
user constants, and set values with characters
per line.
Keys
Execute operation such as setting user
constants, monitoring, etc.