Yaskawa Varispeed-656 DC5 - Manual (Page 43)

4 OPERATION
E-33
Note: Except in diagrams, Keys are referred to using the Key names listed
in Table 8.
Table 8 Key Functions
Key Name Function
LOCAL/REMOTE Key Switches between operation (LOCAL) via the Digital
Operator and control circuit terminal (REMOTE) opera-
tion.
This Key can be enabled or disabled by setting a user
constant (o2-01).
MENU Key Displays menus.
ESC Key Returns to the status before the DATA/ENTER Key was
pressed.
JOG Key Not used.
FWD/REV Key Not used.
RESET Key Sets the number of digits for user constant settings.
Also acts as the reset Key when a fault has occurred.
Increment Key Selects menu items, groups, functions, user constant
names, and increments set values.
Decrement Key Selects menu items, groups, functions, user constant
names, and decrements set values.
DATA/ENTER Key Enters menu items, functions, constants, and set values
after they are set.
RUN Key Starts the VS-656DC5 operation when the VS-656DC5 is
in operation with the Digital Operator.
STOP Key Stops the VS-656DC5 operation when the VS-656DC5 is
in operation with the Digital Operator.
This Key can be enabled or disabled by setting a user
constant (o2-02) when operating from the control circuit
terminal.
LOCAL
REMOTE
MENU
ESC
JOG
FWD
REV
RESET
DATA
ENTER
RUN
STOP