Yaskawa P7 to P1000 - Manual (Page 9)

4 P7 and P1000 Digital Operators
YASKAWA PL.P1000.01 P7 to P1000 - Product Transition Guide 9
4 P7 and P1000 Digital Operators
The P1000 digital operator JVOP-180C, has the following features:
• standard built-in Real Time Clock (RTC),
• built-in copy function and parameter verification,
• Soft keys to simplify operation and programming,
• LCD contrast adjustment,
• simplified parameter grouping for easier navigation and set-up,
• improved button layout for faster parameter selection,
• and a Quick Settings menu consisting of the most commonly edited parameters to aid in simple start up. The default
quick setting menu carries 19 parameters. The total number of quick setting parameters is based on A1-03 (Initialization
Parameter).
Table 4 P7 and P1000 Digital Operators
• P1000 copy function is capable of uploading all parameter settings from the P1000 drive memory.
• Uploading of P7 parameters to the P1000 is not available.
• To copy parameters between P1000 drives, all drives must be the same model, have the same software version, and be
set to the same control mode A1-02. The P1000 motor control method is fixed at V/f mode.
Table 5 P7 to P1000 Menu Structure Comparison
P7 Operator P1000 Operator
LCD Backlit Display
5 Line x 16 Characters
LCD Backlit Display
5 Line x 16 Characters
New Button Layout
Soft Keys (F1/F2)
P7 P1000
Operation “DRIVE” Operation
Quick Setting “QUICK” Auto-Tuning
Programming “ADV” Programming
Modified Constants “VERIFY” Quick Settings
Auto-Tuning “A.TUNE” Modified Constants
— Monitor Menu
-DRIVE- Rdy
Frequency Ref
U1- 01 = 60.00Hz
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
U1-02= 60.00Hz
U1-03= 10.05A
LO
RE
F2 F1
ESC
RUN STOP
ENTER RESET
ALM DIGITAL OPERATOR JVOP-180