Yaskawa P7 to P1000 - Manual (Page 19)

10 Appendix 1 P7 and P1000 Ratings
YASKAWA PL.P1000.01 P7 to P1000 - Product Transition Guide 19
‹ P1000 Drive Derating Data
„ P1000 Carrier Frequency Derating
Consult factory for carrier frequency derating data for P1000 drives.
„ P1000 Temperature Derating
Figure 4
Figure 4 Ambient Temperature and Installation Method Derating
„ P1000 Altitude Derating
The drive standard ratings are valid for installation altitudes up to 1000 m. For installations from 1000 m to 3000 m, the
drive rated output current must be derated for 1% per 100 m above 1000 m.
4018 (40.0)
10
117
4A0044 (44.0)
SPWM 120
40 30
460
4022 (50.4) 107
4024 (52.0) 120 4A0058 (58.0) 52 40
4030 (67.2)
8
107 4A0072 (72.0) 65 50
4037 (77.0) 117 4A0088 (88.0) 77 60
4045 (96.0) 114 4A0103 (103.0) 96 75
4055 (125.0)
5
108 4A0139 (139.0) 124 100
4075 (156.0) 115 4A0165 (165.0) 156 125
4090 (180.0) 8 120 4A0208 (208.0) 180 150
4110 (240.0)
5
108
4A0250 (250.0) 240 200
4132 (260.0)
120
4160 (304.0) 4A0296 (296.0) <1> 302 250
4185 (414.0)
2
107
4A0362 (362.0) 361 300
4A0414 (414.0) 414 350
4220 (515.0) 118 4A0515 (515.0)
477 400
515 450
4300 (675.0) 120 4A0675 (675.0) 590 500
— — — 4A0930 (930)
Refer to
motor
namplate.
800
— — — 4A1200 (1200)
Refer to
motor
namplate.
1000
<1> Rated drive current is slightly less than NEC motor amps, refer to the motor nameplate in the application to ensure drive output current is
sufficient for the application.
P7 Model
CIMR-P7U
(Output Amps)
Default Fc
(kHz)
Intermittent
Overload %
P1000 Model
CIMR-PU
(Output Amps)
Default Fc
(kHz)
SPWM
Intermittent
Overload %
NEC Motor
Amps
NEC
Motor HP
Motor
Vac
/ ,31(0$ 7\SH (QFORVXUH
/ ([WHUQDO +HDWVLQN OQVWDOODWLRQ RU
)LQOHVV 'ULYH ZLWK & ILOWHU
/ ,32SHQ&KDVVLV (QFORVXUH
'ULYH 5DWLQJ
/
$PELHQW WHPS
q&
/ 6LGHE\6LGH 0RXQWLQJ