Yaskawa P7 to P1000 - Manual (Page 24)

24 YASKAWA PL.P1000.01 P7 to P1000 - Product Transition Guide
13 Appendix 2 Parameter Cross Reference
13 Appendix 2 Parameter Cross Reference
‹ Parameter Setting Procedure
1.
Table 12 lists the parameter setting information needed to upgrade from P7 to a new P1000 drive.
2.
Check all P7 parameters that have been changed from their default settings by using the Modified Constants
Menu.
3.
Set parameters as described in this section.
Note: Default values in Table 12 are listed for P1000 200 V Class 0.4 kW Drive Using V/f Control Mode.
Table 12 Parameter Cross Reference
Parameter Name
P7 P1000 Setting
Parameter Default Parameter Default P7 P1000
Environment
Settings
Language
Selection
A1-00 0 A1-00 0
A1-00 A1-00
0: English 0: English
1: Japanese 1: Japanese
2: German 2: German
3: French 3: French
4: Italian 4: Italian
5: Spanish 5: Spanish
6: Portuguese 6: Portuguese
— 7: Chinese
Access Level
Selection
A1-01 2 A1-01 2
A1-01 A1-01
0: Operation only
(monitors only) 0: Operation only
(monitors only)
1: User Parameters
1: User Parameters
Set parameters A2-01 to A2-32
2: All parameters 2: All parameters
Control Method
Selection
N/A 0 A1-02 0
N/A N/A
V/f Control V/f Control
— —
— —
— —
— —
— —
— —
Initialize
Parameters
A1-03 0 A1-03 0
A1-03 A1-03
0: No initialization 0: No initialization
1110: User initialize 1110: User initialize
2220: 2-wire sequence 2220: 2-wire sequence
3330: 3-wire sequence 3330: 3-wire sequence
—
5550: Reset oPE04
8008: Pump
8009: Pump w/ PI
8010: Fan
8011: Fan w/ PI
Password A1-04 0 A1-04 0000 —
Password Setting A1-05 0 A1-05 0000 —
User Parameters
A2-01 to
A2-32
—
A2-01 to
A2-32
—
If setting A1-01 to 1, refer to the manual
and set parameters A2-01 through A2-32.