7 appendix a: transport instructions – SMA SC 100LV-560HE User Manual
Page 76
Appendix A: Transport instructions
SMA Solar Technology AG
76
SC125_560HE-IEN083220
Installation Guide
7 Appendix A: Transport instructions
Instructions for Transporting Sunny Central 100 LV to 560 HE inverters
To avoid cases of damage, observe the following information on how to transport a Sunny Central:
• The Sunny Central must not be re-loaded during transport. SMA Solar Technology AG has
agreed on a general re-load prohibition with all its freight forwarders.
• All Sunny Centrals are labeled on the front and rear sides with the international center of gravity
symbol.
• Observe all information concerning the transport of the Sunny Central. These stipulate that the
Sunny Centrals may only be transported by means of a forklift or pallet truck with the broadside
(front or back side) of the Sunny Central facing the lifting gear. Lifting the device at the sides
(left or right) is forbidden.
• For the transport by crane, use an appropriate crane fork which is suitable for the weight of the
Sunny Central. The crane fork is run through the openings at the base.
• Transporting the device at the top by using eyelets is only permitted under certain conditions.
Read chapter „Overview of transport possibilities of the individual cabinets.“ (79) to know
which Sunny Central may be transported using eyelets.
An appropriate crane rack has to be mounted which guarantees a symmetrical loading of all
four eyelets and ensures the lifting of the single cabinet component under a cable control angle
of 90°.
• When transporting the Sunny Central, only use the original SMA or cabinet manufacturer
eyelets. The eyelets are not included in the delivery, you can order these from
SMA Solar Technology.
• All Sunny Centrals are delivered on high-quality pallets.
• The Sunny Central must not be tilted during transport.
• Only individual cabinet units can be transported.
WARNING!
Heavy weight of switch cabinet units!
Danger of tipping during transport!
• The cabinet units must always be transported in an upright position.
• The center of gravity of the Sunny Central is indicated on the outside of the
packaging.