SMA SC 100LV-560HE - Manual (Page 16)

Delivery SMA Solar Technology AG
16 SC125_560HE-IEN083220 Installation Guide
3 Delivery
3.1 Transport
Only the transport methods described in the installation guide are permissible, follow the transport
requirements in Appendix A.
The inverters consist of two switch cabinet units, the DC / inverter cabinet and the AC cabinet which
are separately transported and installed on site.
The inverters and/or inverter units are delivered on pallets. Under standard delivery conditions, a
forklift must be available. When unloading, the heavy-load markings must be given due consideration.
3.1.1 Transport Possibilities
Transport using a pallet truck or forklift
For the transport of the respective switch cabinet with pallet trucks or forklifts, the plinth panel can be
unscrewed and in this way the fork of the pallet truck or lift can be put under the cabinet.
Both screws per plinth panel can be loosened with a TX30 torque key.
Transport using a crane
Due to the heavy weight of the switch cabinets, the transport with crane eyelets is only permitted under
certain conditions. The inverters are therefore delivered without crane eyelets. Otherwise there is the
risk of damaging the cabinet. Use an appropriate crane fork instead which can be put below the
switch cabinet when the plinth panels are unscrewed.
WARNING!
Heavy weight of switch cabinet units!
Danger of tipping during transport!
• The cabinet units must always be transported in an upright position.
• The center of gravity of the Sunny Central is indicated on the outside of the
packaging.
ATTENTION!
Damage to the Sunny Central through missing plinth panels
The plinth panels are essential for stable positioning of the switch cabinet. In the case of
transport on a pallet, it is necessary to install the plinth panels. Otherwise there is the risk
that the base will collapse under the weight of the switch cabinet.