SMA SUNNY CENTRAL - Manual (Page 32)

Parameters SMA Solar Technology AG
32 SC-BEN092751 User Manual
6.3 Adjusting Parameters
The Sunny Central parameters can be adjusted as follows:
Impaired Functionality of Sunny Central due to Altered Parameters
Improperly altered parameters can partly or completely impair the functionality of the
Sunny Central.
• Parameters marked with * may only be adjusted upon consultation with SMA (see
section 6.3 "Adjusting Parameters" (page 32)).
• After work has been carried out on the Sunny Central Control, it must then be
relocked, in order to prevent third parties from changing the parameters.
Adjusting Parameters
These instructions describe how you can adjust parameters at the Sunny Central Control.
You can use the following possibilities and tools to adjust the parameters:
• At the Sunny Central with the Sunny Central Control
• On site with a laptop and the Sunny Data Control software
• From a PC via remote access, with Sunny Data Control
The Sunny Data Control documentation describes how you can adjust parameters with
Sunny Data Control.
1. Enter the password as described in section 5.4 "Entering the
Password" (page 26).
2. In the online info display, press [ESC].
3. Navigate to the "Device Set-up“ menu with the [ ↓ ] arrow
button, and select it by pressing [ENTER].
[ESC]
Status MPP
Pac 85.7kW
E_Today 357.5kWh
E_Total2512.3kWh
3 x [ ↓ ]
[ENTER]
[ Main Menu ]
Operating Data
Spot Values
Long-Term Data
→ Device Set-up