SMA SB 3000TL-20 Installation - Manual (Page 47)

SMA Solar Technology AG Electrical Connection
Installation Guide SB30TL_40TL_50TL-IA-IEN120231 47
5.5.2 Setting the Country Standard and Language using Rotary
Switches
1. Open the inverter as described in section 7.2 ”Opening the Inverter” (page 61).
2. Set the arrows on both rotary switches (A and B)
using a screwdriver to the desired positions
(see table in section 5.5.1 ”Checking the Country
Standard” (page 44)). Use a screwdriver with a
width of 2.5 mm.
3. Close the inverter as described in section 7.3 ”Closing the Inverter” (page 64).
Jumper for English language
You can also set the language to English by
means of a jumper (e.g. for service purposes).
• To do so, plug the jumper onto the upper
two pins as shown on the right.