SMA SB 3000TL-20 Installation - Manual (Page 41)

SMA Solar Technology AG Electrical Connection
Installation Guide SB30TL_40TL_50TL-IA-IEN120231 41
6. Check the Electronic Solar Switch for wear, as
described in section 8.2 ”Checking the Electronic
Solar Switch (ESS) for Wear” (page 69) and
attach it firmly.
☑ The PV generator is now connected.
You can now commission the inverter as described in section 6 ”Commissioning” (page 53).
Other connection options are optional (see section 5.6 ”Communication” (page 48)).
NOTICE!
Damage to Electronic Solar Switch.
If it is not correctly connected, the Electronic Solar Switch can be damaged.
• Plug the handle firmly onto the socket of the Electronic Solar Switch.
• The holder must close flush with the enclosure.
• Check that the handle is securely in place.