SMA SB 1200 Installation - Manual (Page 39)

SMA Solar Technology AG Commissioning
Installation Guide SB12-17-IA-en-52 39
6.2 Display Messages during Initialization
After startup of the inverter, the display shows the inverter
type.
After 5 seconds, or when you tap again on the enclosure
cover, the firmware version of the internal processors is
displayed.
After a further 5 seconds, or when you tap again, the
configured country standard is displayed
(example: “GER/VDE0126-1-1”).
Show display messages again
In order to show the display messages from the initialization phase again during
operation,tap twice on the enclosure cover.