SMA SB 1200 Installation - Manual (Page 15)

SMA Solar Technology AG Unpacking
Installation Guide SB12-17-IA-en-52 15
3 Unpacking
3.1 Scope of Delivery
Check the delivery for completeness and for any visible external damage. Contact your dealer if
anything is damaged or missing.
3.2 Identifying the Inverter
You can identify the inverter by the type label. The type label is on the right side of the enclosure.
The serial number (Serial No.) and the type (Type / Model) of the product, as well as device-specific
characteristics are specified on the type label.
Object Quantity Description
A 1 Sunny Boy
B 1 Wall mounting bracket
C 1 Electronic Solar Switch (ESS)
D 4 DC plug connectors (2 x positive/2 x negative)
E 4 Sealing plugs for DC plug connectors
F 1 Protective cap for AC socket on inverter
G 1 AC connection socket: socket unit, threaded sleeve, pressure
screw PG13.5, sealing ring PG13.5, fastening case PG13.5,
cable gland PG16
H 1 M6x12 cylinder head screw and locking washer
I 1 Jumper
K 1 Installation guide
L 1 User manual
M 1 Set of documents with explanations and certificates
N 1 Supplementary sheet with inverter factory settings