SMA SB 1200 Installation - Manual (Page 19)

SMA Solar Technology AG Mounting the Device
Installation Guide SB12-17-IA-en-52 19
3. Use the upper mounting clips to fit the inverter in the
wall mounting bracket so that it cannot be pushed
out of the wall mounting bracket from the side.
4. If a second grounding conductor is required in the
country of installation, you need to ground the
inverter and secure it against being lifted out of
place, as described in section 5.2.3 ”Connecting
additional grounding” (page 27).
5. . If a second grounding conductor is not required,
secure the inverter against being lifted out of place
using the enclosed M6x12 screw.
6. Check to ensure the inverter is firmly fastened.
☑ The inverter is now mounted to the wall.