SMA SB 1200 Installation - Manual (Page 10)

Safety SMA Solar Technology AG
10 SB12-17-IA-en-52 Installation Guide
Certified Countries
The Sunny Boy 1200/1700 (with according configuration) fulfill the requirements specified in the
following standards and directives (dated: 12/2010):
* On request
** only applies to SB 1200-IT/SB 1700-IT
*** does not apply to national standard deviations of EN 50438
**** Firmware version 3.06 and higher
SMA Solar Technology AG can preset special grid parameters for other countries/installation
locations according to customer request, after evaluation by SMA Solar Technology AG. You can
make later modifications yourself by changing software parameters with respective communication
products (e.g. Sunny Data Control or Sunny Explorer) (see section 5.6 ”Setting the Grid and Country
Parameters” (page 36)). To change grid-relevant parameters, you need a personal access code - the
so-called SMA Grid Guard Code. The application form for the personal access code is located in the
download area at www.SMA.de/en, in the "Certificate" category for each inverter.
SB 1200 SB 1700
• AS4777 (2005) • AS4777 (2005)
• C10/C11 (05.2009) • C10/C11 (05.2009)
• CER/06/190 (10.2006)* • CER/06/190 (10.2006)
• DK 5940 Ed.2.2 (02.2006)** • DK 5940 Ed.2.2 (02.2006)**
• EN 50438:2008*** • EN 50438:2008***
• G83/1-1:2008 • G83/1-1:2008
• IEEE929 • IEEE929
• PPC:2006 • PPC:2006
• PPDS:2009 • PPDS:2009
• RD 1663/2000 (2000) • RD 1663/2000 (2000)
• RD 1663/661 • RD 1663/661
• VDE 0126-1-1 (02.2006) • VDE 0126-1-1 (02.2006)
• UTE C15-712-1**** • UTE C15-712-1****