SMA SB 1200 Installation - Manual (Page 28)

Electrical Connection SMA Solar Technology AG
28 SB12-17-IA-en-52 Installation Guide
5.3 Setting the Display Language
You can set the language of the display using the switches on the underside of the display assembly
inside the inverter.
Procedure
1. Open the inverter as described in section 7.2 ”Opening the Inverter” (page 45).
2. Set the switches for the required language, as
shown below.
For type SB 1200-IT/1700-IT inverters, the following switch settings apply for firmware version
3.06 and higher:
3. Close the inverter as described in section 7.3 ”Closing the Inverter” (page 48).
☑ The display language has now been set.
Language Switch S2 Switch S1
German B B
English B A
French A B
Spanish A A
Language Switch S2 Switch S1
German B B
Italian B A
French A B
English A A