SMA SB 1200 Installation - Manual (Page 30)

Electrical Connection SMA Solar Technology AG
30 SB12-17-IA-en-52 Installation Guide
5.4.2 Assembling the DC Plug Connector
In order to connect to the inverter, all connecting cables of the PV modules must be equipped with the
DC plug connectors provided.
To assemble the DC plug connectors, proceed as detailed below. Ensure the plug connectors have
the correct polarity. The DC plug connectors are marked with "+" and " − ".
Cable requirements:
• Use a PV1-F cable.
Procedure
1. Insert stripped cable into the plug up to the limit.
2. Press the clamping clip downward until you hear an
audible click.
3. Ensure the cable is correctly in place.
Result Action
☑ If the conductors are visible in the hollow
cavity of the clamp, the cable is in the
correct position.
• Proceed to step 4.