SMA FLX Series - Manual (Page 4)

CAUTION
Maintenance and modification
Only authorised personnel are permitted to modify the
inverter. To ensure personal safety, use only original
spare parts available from the supplier. If non-original
spare parts are used, compliance with CE guidelines in
respect of electrical safety, EMC and machine safety is
not guaranteed.
The temperature of the cooling racks and components
inside the inverter can exceed 70 ºC. Observe the danger
of burn injury.
DC voltages up to 1000 V are present in a PV system even
when the inverter is disconnected from the AC grid. Faults
or inappropriate use may lead to electric arcing.
WARNING
PV modules generate voltage when exposed to light.
WARNING
Do not work on the inverter while disconnecting DC and
AC.
The short-circuit current of the photovoltaic panels is only
slightly higher than the maximum operating current and
depends on the level of solar irradiation.
Conformity
Go to the download area at www.SMA.de, Approvals and
Certifications, for information.
See also 5 Technical Data.
CE marking - This symbol certifies the conformity of
the equipment with the requirements of the
applicable EC directives
Safety and Conformity
L00410568-03_2q / Rev. date: 2014-06-20