HEIDENHAIN iTNC 530 (340 49x-05) Pilot - Manual (Page 150)

150
Definin
g Machining Po
sitions
Frame straight, rotated or distorted
 Starting point 1st axis : Coordinate of the starting point
of the frame ( 1 ) in the major axis of the working plane
 Starting point 2nd axis : Coordinate of the starting point
of the frame ( 2 ) in the minor axis of the working plane
 Distance in 1st axis : Distance of the machining positions
in the major axis of the working plane. You can enter a
positive or negative value
 Distance in 2nd axis : Distance of the machining positions
in the minor axis of the working plane. You can enter a
positive or negative value
 Number of lines : Total number of rows in the frame
 Number of columns : Total number of columns in the frame
 Rotation : Angle of rotation by which the entire frame is
rotated around the entered starting point. Reference axis:
Major axis of the active machining plane (e.g. X for tool axis
Z). You can enter a positive or negative value
 Rotary pos. ref. ax. : Angle of rotation around which only
the major axis of the machining plane is distorted around the
entered starting point. You can enter a positive or negative
value.
 Rotary pos. minor ax. : Angle of rotation around which only
the minor axis of the machining plane is distorted around the
entered starting point. You can enter a positive or negative
value.
 Top surface coordinate : Coordinate of the top surface of
the workpiece
The Rotary pos. ref. ax. and Rotary pos. minor ax.
parameters are added to a previously performed rotation of
the entire frame.