HEIDENHAIN iTNC 530 (340 49x-05) Pilot - Manual (Page 148)

148
Definin
g Machining Po
sitions
Single row, straight or arced
 Starting point 1st axis : Coordinate of the starting point
of the row in the reference axis of the working plane.
 Starting point 2nd axis: Coordinate of the starting point
of the row in the minor axis of the working plane.
 Distance: Distance between the machining positions. You
can enter a positive or negative value
 Number of positions: Total number of machining positions.
 Rotation : Angle of rotation around the entered starting
point. Reference axis: Major axis of the active machining
plane (e.g. X for tool axis Z). You can enter a positive or
negative value
 Top surface coordinate : Coordinate of the top surface of
the workpiece