HEIDENHAIN iTNC 530 (340 49x-05) Cycle programming - Manual (Page 426)

426 Touch Probe Cycles: Automatic Workpiece Inspection
16.13 MEA
S
URE PLANE (Cy
c
le 431, DIN/ISO: G431)
Cycle parameters
U 1st meas. point 1st axis Q263 (absolute):
Coordinate of the first touch point in the reference
axis of the working plane. Input range: -99999.9999 to
99999.9999
U 1st meas. point 2nd axis Q264 (absolute):
Coordinate of the first touch point in the minor axis of
the working plane. Input range: -99999.9999 to
99999.9999
U 1st meas. point 3rd axis Q294 (absolute):
Coordinate of the first touch point in the touch probe
axis. Input range: -99999.9999 to 99999.9999
U 2nd meas. point 1st axis Q265 (absolute):
Coordinate of the second touch point in the reference
axis of the working plane. Input range: -99999.9999 to
99999.9999
U 2nd meas. point 2nd axis Q266 (absolute):
Coordinate of the second touch point in the minor axis
of the working plane. Input range: -99999.9999 to
99999.9999
U 2nd meas. point 3rd axis Q295 (absolute):
Coordinate of the second touch point in the touch
probe axis. Input range: -99999.9999 to 99999.9999
U 3rd meas. point 1st axis Q296 (absolute):
Coordinate of the third touch point in the reference
axis of the working plane. Input range: -99999.9999 to
99999.9999
U 3rd meas. point 2nd axis Q297 (absolute):
Coordinate of the third touch point in the minor axis of
the working plane. Input range: -99999.9999 to
99999.9999
U 3rd meas. point 3rd axis Q298 (absolute):
Coordinate of the third touch point in the touch probe
axis. Input range: -99999.9999 to 99999.9999
X
Y
Q297
Q263
Q264
Q266
Q296 Q265
Y'
X'
X
Z
Q295
Q298
Q294
Q260
MP6140
+
Q320