HEIDENHAIN iTNC 530 (340 49x-05) Cycle programming - Manual (Page 4)

4
TNC Model, Sof
tw
a
re
and F
eat
ur
es
TNC Model, Software and Features
This manual describes functions and features provided by TNCs as of
the following NC software numbers.
The suffix E indicates the export version of the TNC. The export
version of the TNC has the following limitations:
„ Simultaneous linear movement in up to 4 axes
The machine tool builder adapts the usable features of the TNC to his
machine by setting machine parameters. Some of the functions
described in this manual may therefore not be among the features
provided by the TNC on your machine tool.
TNC functions that may not be available on your machine include:
„ Tool measurement with the TT
Please contact your machine tool builder to become familiar with the
features of your machine.
Many machine manufacturers, as well as HEIDENHAIN, offer
programming courses for the TNCs. We recommend these courses as
an effective way of improving your programming skill and sharing
information and ideas with other TNC users.
TNC model NC software number
iTNC 530 340 490-05
iTNC 530 E 340 491-05
iTNC 530 340 492-05
iTNC 530 E 340 493-05
iTNC 530 programming station 340 494-05
User's Manual:
All TNC functions that have no connection with cycles are
described in the User's Manual of the iTNC 530. Please
contact HEIDENHAIN if you require a copy of this User's
Manual.
Conversational Programming User's Manual,
ID: 670 387-xx.
DIN/ISO User's Manual, ID: 670 391-xx.
smarT.NC user documentation:
The smarT.NC operating mode is described in a separate
Pilot. Please contact HEIDENHAIN if you require a copy of
this Pilot. ID: 533 191-xx.