HEIDENHAIN iTNC 530 (340 49x-05) Cycle programming User Manual
Page 127
HEIDENHAIN iTNC 530
127
4.9 HELICAL THREAD DRILLING/MI
LLING (Cy
c
le 265, DIN/ISO: G265)
U
Workpiece surface coordinate
Q203 (absolute):
Coordinate of the workpiece surface. Input range:
-99999.9999 to 99999.9999
U
2nd setup clearance
Q204 (incremental): Coordinate
in the spindle axis at which no collision between tool
and workpiece (fixtures) can occur. Input range 0 to
99999.9999, alternatively PREDEF
U
Feed rate for countersinking
Q254: Traversing
speed of the tool during countersinking in mm/min.
Input range: 0 to 99999.999; alternatively FAUTO, FU.
U
Feed rate for milling
Q207: Traversing speed of the
tool during milling in mm/min. Input range: 0 to
99999.999; alternatively FAUTO.
Example: NC blocks
25 CYCL DEF 265 HEL. THREAD DRLG/MLG
Q335=10
;NOMINAL DIAMETER
Q239=+1.5 ;PITCH
Q201=-16
;DEPTH OF THREAD
Q253=750
;F PRE-POSITIONING
Q358=+0
;DEPTH AT FRONT
Q359=+0
;OFFSET AT FRONT
Q360=0
;COUNTERSINK
Q200=2
;SETUP CLEARANCE
Q203=+30
;SURFACE COORDINATE
Q204=50
;2ND SETUP CLEARANCE
Q254=150
;F COUNTERSINKING
Q207=500
;FEED RATE FOR MILLING