HEIDENHAIN ND 522 - Manual (Page 78)

78 II Technical Information
II
-
2
Installation
Set
u
p
Counter Settings
The COUNTER SETTINGS form is the parameter where the operator
defines the user application for the readout. The choices are for
milling, or turning applications.
A FACTORY DEFAULT soft key appears in the COUNTER SETTINGS
choice of options. When pressed, the configuration parameters (based
on either mill, or turn) will be reset to factory defaults. The operator will
be prompted to press YES to set parameters to factory default
settings, or NO to cancel, and return to previous menu screen.
The NUMBER OF AXES field sets the number of axes needed. An
axes soft key will appear to choose between either 2, or 3 axes.
Diagnostics
The DIAGNOSTICS form provides access for testing the keypad, and
display.
Keypad Test
An image of the keypad provides an indication when a switch is
pressed, and released.
 Press each hard, and soft key to test. A dot will appear on each key
when it has been pressed indicating that it is operating properly.
 Press the C key two times to exit the keypad test.
Display Test
 To test the display, press the enter key to set the display to solid
black, solid white, and then back to normal.