HEIDENHAIN ND 522 - Manual (Page 76)

76 II Technical Information
II
-
2
Installation
Set
u
p
Configuring the Compensation Table
 Press the EDIT TABLE soft key to view the table entries.
 Use the UP, or DOWN ARROW keys, or the numeric keys to move
the cursor to the correction point to be added, or changed. Press
Enter
.

Enter the known error which exists at this point. Press Enter.
 When completed, press C key to exit the table, and return to the
ERROR COMPENSATION form.
Reading the Graph
The error compensation table may be viewed in table, or graphical
formats. The graph shows a plot of a translation error vs. measured
value. The graph has a fixed scale. As the cursor is moved through the
form, the location of the point on the graph is indicated with a vertical
line.
Viewing the Compensation Table
 Press the EDIT TABLE soft key.
 To switch between the table, and graph views, press the VIEW soft
key.
 Press the UP, or DOWN ARROW keys, or the numeric keys to move
the cursor within the table.
The error compensation table data may be saved to, or loaded from a
PC via the USB port.
Exporting the Current Compensation Table
 Press the EDIT TABLE soft key
 Press the IMPORT/EXPORT soft key.
 Press the EXPORT TABLE soft key.
Importing a New Compensation Table
 Press the EDIT TABLE soft key.
 Press the IMPORT/EXPORT soft key.
 Press the IMPORT TABLE soft key.
Pressing Enter saves the Error Compensation data
entered, and is retained if the power is cycled. Pressing the
C key to exit without pressing the Enter key only retains
data until power is cycled.