HEIDENHAIN ND 522 - Manual (Page 42)

42 I Operating Instructions
I - 3 Milling Specific Oper
ations
Enter nominal position value for corner point 3 :
Y = +50 mm,
select tool radius compensation R + with R+/- soft
key, and press until R+ is shown next to axis form.
Press Enter.
Traverse the Y axis until the display value is zero. The
square in the graphic positioning aid is now centered
between the two triangular marks.
Press the X axis key
Enter nominal position value for corner point 4 :
X = +60 mm,
select tool radius compensation R +, and press
Enter
.
Traverse the X axis until the display value is zero. The
square in the graphic positioning aid is now centered
between the two triangular marks.
NOMINAL POSITION VALUE
NOMINAL POSITION VALUE