HEIDENHAIN ND 522 - Manual (Page 17)

ND 522/523 17
I - 2 Gener
al Oper
ations f
o
r ND
522/523
General Operation Hard Key Function Overview
The following is a list of Hard keys, and a description of their function
which are located on the front panel of the readout.
Hard Key
Page 1
Hard Key function Hard key
Symbol
INCREMENTAL
/ABSOLUTE
Switches display between
Distance-To-Go (Incremental)
Actual Value (Absolute). (page 18)
1/2 (Mill
Function Only)
Used to divide the current position
by two. (page 29)
CALC Opens the Calculator functions.
(page 30)
DATUM Opens the Datum form to set the
datum for each axis. (page 35)
TOOL Opens the Tool Table. (page 31 for
Milling. page 58 for Turning)
CIRCLE
PATTERN
Opens the Circle Pattern form. This
calculates the hole positions (page
46) for Milling
LINEAR
PATTERN
Opens the Linear Pattern form. This
calculates the hole positions (page
49) for Milling
INCLINE
MILLING, or
VECTORING
Opens the Incline milling form (page
52) for Milling, or the Vectoring
form (page 66) for Turning
ARC MILLING,
or TAPER CALC
Opens the Arc milling forms (page
55) for Milling, or the Taper Calc
form (page 64) for Turning