HEIDENHAIN TNC 122 User Manual - Manual (Page 54)

8 User Parameters
54 TNC 122
User Parameters in the TNC 122
Parameters whose functions are determined by the machine tool builder
The machine tool builder determines the function of the machine
parameters:
•
MP4310.0
• MP4310.1
Sequence for crossing the reference marks
MP1340.0: 1st axis X axis: 1
MP1340.1: 2nd axis Y axis: 2
MP1340.2: 3rd axis Z axis: 3
No reference mark evaluation: 0
Programming station setup
MP7210 TNC with machine: 0
TNC as a programming station with active PLC: 1
TNC as programming station with inactive PLC: 2
Dialog language
MP7230 German: 0
English: 1
French: 2
Italian: 3
Spanish: 4
Position display in the tool axis
MP7285 Display the position of the tool datum: 0 0 0 0 0
Display the position of the tool point: 1
Select the position display
MP7322 Actual position: 0
Servo lag: 1
Reference position: 2
Enable continuing traverse with the direction keys
MP7680 Continuing traverse disabled: 0
Continuing traverse enabled: 1