HEIDENHAIN TNC 122 User Manual - Manual (Page 32)

5 Programming
32 TNC 122
Entering the program number
Select a program with a number from 1 to 20.
Mode of operation: PROGRAMMING AND EDITING
PGM
Select program management.
ENT
Switch to the EDIT PGM function.
E D I T P G M
ENT
Select the EDIT PGM function.
P G M N O . =
The equal sign blinks: Enter the PGM-NO., for example 7.
Confirm your entry. Now you can enter and edit the program.
7 ENT
The BEGIN block of the selected program appears.
Deleting programs
If you no longer need certain programs, or if you need to make
space in the TNC's memory, you can delete programs.
Mode of operation: PROGRAMMING AND EDITING
PGM
Select program management.
After deletion the BEGIN block of the deleted program appears.
The contents of the program is deleted and the BEGIN and END
blocks of the deleted program remain in the TNC's memory.
Erase all programs
⇒ ⇒ ⇒ ⇒ ⇒ Use the upward arrow key to go from the DELETE PGM func-
tion to the DELETE ALL PGM function.
⇒ ⇒ ⇒ ⇒ ⇒ Press ENT to erase all programs.
D E L E T E P G M
ENT
Select the DELETE PGM function.
Switch to the DELETE PGM function.
P G M N O . =
The equals sign blinks: enter the PGM NO. 5 to erase program 5.
5 ENT