Polaris 2009 Victory Victory Vision - Manual (Page 72)

69
INSTRUMENTS, FEATURES, & CONTROLS
Contr
ols
Engine Starter Button
The engine starter button is used to start the engine,
activate the headlight, and operate in reverse gear (if
equipped).
To start the engine, the engine stop/run switch must be in
the RUN position. The transmission must be in neutral (or
the clutch must be disengaged) and the reverse lever (if
equipped) must be disengaged. Press the right side of the
starter button to engage the starter.
NOTE:
Read the engine starting procedure beginning on
page 112 before starting the engine.
To activate the headlight, the ignition switch must be on.
Tap the starter button to turn the headlight on without
starting the engine.
To operate in reverse, see page 127
Start
RIGHT Handlebar Switch
visionownersmanual.book Page 69 Wednesday, February 13, 2008 4:31 PM