Polaris 2009 Victory Victory Vision - Manual (Page 200)

197
MAINTENANCE
Maintenance
Tail / Brake Lamp / Turn Signal Bulb Replacement
1. Open saddlebags. (NOTE: Trunk or Street
Panel removal is not necessary).
2. Remove license plate and plate bracket (1). Lift
tail trim (“M” panel) (2) to disengage tabs (See
“Street Trim Panel Removal” on page 193.)
3. Remove six button head screws (3) from lower
rear bumper using a 4mm Allen wrench.
4. Remove five button head screws (4) that secure
tail light lenses using a 4mm Allen wrench.
5. Pull both tail lights (5) straight rearward to
release all spring tabs from rear fender and
expose bulb sockets as required.
6. Rotate bulb socket 1/4 turn counter-clockwise to
remove socket. Note orientation for assembly.
7. Pull the bulb straight out of the socket and
replace it with the new bulb.
8. Assemble in reverse order of disassembly.
Torque all button head screws to 36 lb-in.(4 Nm).
1
3
2
4
5
3
3
visionownersmanual.book Page 197 Wednesday, February 13, 2008 4:31 PM