Polaris 2009 Victory Victory Vision - Manual (Page 298)

295
AUX - iPod
A
ux/iPOD
AUX Input Cable
iPod Input Cable
Input Cable Setup
The AUX and iPod input cables are
connected to the audio system through a
small hole in the left-side console storage
bin. Only one input cable can be
connected at any given time.
To change an input cable:
1. Open the left-side console storage bin.
2. Locate the input cable and sealing
grommet at the bottom of the bin.
3. Carefully pull the cable inside the bin.
visionownersmanual.book Page 295 Wednesday, February 13, 2008 4:31 PM