Polaris 2009 Victory Victory Vision - Manual (Page 55)

52
INSTRUMENTS, FEATURES, & CONTROLS
Contr
ols
Clock
1. Turn the key to ON or ACC to view the clock. To change the
setting, use the MODE button to toggle to the odometer.
2. Press and hold the MODE button until the hour segment
flashes, then release the button. Tap the MODE button to
advance to the desired setting.
NOTE: If LOW FUEL is flashing, the display will not enter the CLOCK
SET mode.
3. Repeat step 2 to set the 10-minute and 1-minute segments, then press and hold the
MODE button to save the settings and exit the CLOCK SET mode.
4. Turn the key off. The clock is set until the
battery is disconnected or discharged.
Error Screen
If “Err” appears in the clock area, record the three
code numbers displayed on the screen. See an
authorized VICTORY dealer for code details. See
“Check Engine” indicator information on page 59.
Clock
Avg
C
F
8
88 1 88 : 88
8
.
8 8
:
88
:
8
Speed Range Inst Time
TRIP 1
TRIP 2 km / h
miles / gah
Error Code
Number (0-9)
“Err”
Suspect Parameter Number (SPN)
Failure Mode
Indicator (FMI)
visionownersmanual.book Page 52 Wednesday, February 13, 2008 4:31 PM