Polaris 2009 Victory Victory Vision - Manual (Page 184)

181
MAINTENANCE
Maintenance
Battery Removal
1. Turn handlebars fully right.
2. Remove five belly pan screws (1) with a 6mm
Allen wrench.
3. Remove screw (2) that joins the two side grills.
NOTE FOR INSTALLATION: The grill bolt is
placed in the FRONT hole; the center belly pan
screw uses the rear hole.
CAUTION
Do not disconnect the positive cable before the
negative cable. Disconnecting the positive cable
first can produce an electric shock that could result
in damage or injury.
2
1
1 1
36 lb-in.
(4 Nm)
85 lb-in.
(10 Nm)
85 lb-in.
(10 Nm)
visionownersmanual.book Page 181 Wednesday, February 13, 2008 4:31 PM