Polaris 2009 Victory Victory Vision - Manual (Page 196)

193
MAINTENANCE
Maintenance
Street Trim Panel Removal
Trim Panel Removal
1. Remove seat (page 190).
2. Remove license plate and plate bracket by
removing the two 4mm Allen screws (1).
3. Lift edges of tail molding at indicated points in
order (2), (3), then (4) to release tabs.
NOTE: Lift tail molding enough to provide clearance to
remove the trim panel.
4. Lift the trim panel (5) straight upward to release
all four tabs at the corners.
5. Install the trunk (page 192).
6. Align tail molding and snap it back into place,
reversing the order of removal.
7. Install the seat (page 190) and license bracket.
1 2
3
4
5
36 LB-IN.
(4 nM)
visionownersmanual.book Page 193 Wednesday, February 13, 2008 4:31 PM