Polaris 2009 Victory Victory Vision - Manual (Page 145)

142
MAINTENANCE
M
ainte
nance
Engine Oil & Filter Change (Cont.)
11. Reinstall the oil fill cap. Start and run the engine
until it reaches normal operating temperature.
NOTE: After an oil change, the low oil pressure indicator
remains illuminated longer than usual before
going out. Do not rev the engine while the low oil
pressure indicator is illuminated.
12. Stop the engine and make sure there are no
leaks around the drain plug and oil filter.
13. Check the oil level and adjust if needed.
NOTICE:
Recycle used oil and filter in accordance with
local regulations.
ENGINE OIL CAPACITY AT
CHANGE (WITH FILTER) Approx. 4.5 qt.
(4.25 liter)
ENGINE OIL CAPACITY AT
CHANGE (WITHOUT FILTER) Approx. 4.0 qt.
(3.8 liter)
1
Approx. 1 qt. (.9 l)
visionownersmanual.book Page 142 Wednesday, February 13, 2008 4:31 PM