beautypg.com

Maintenance, Headlamp bulb replacement – Polaris 2009 Victory Victory Vision User Manual

Page 198

background image

195

MAINTENANCE

Maintenance

Headlamp Bulb Replacement

To replace a headlamp bulb:
1. Remove air filter (page 143). Pull sealing boot

away from the back of the bulb(s) and housing.

2. Press the looped end of the wire clip bulb retainer

and swing the end toward the center of the bulb to

release it from the latch tab.

3. Pull bulb out with wire connector attached.
4. Disconnect wire harness. Install new bulb. DO

NOT TOUCH glass portion of headlamp bulb. Oil

on the glass surface of bulb could cause bulb

failure. Clean with denatured alcohol if touched.

5. Install bulb by reversing steps. Be sure boot is

sealed tightly around bulb base and lens to

prevent moisture from forming inside the lamp.

Headlamp

Bulb Access

visionownersmanual.book Page 195 Wednesday, February 13, 2008 4:31 PM