Polaris 2009 Victory Victory Vision - Manual (Page 150)

147
MAINTENANCE
Maintenance
Drive Belt Tension Overview
On new drive systems or belt, adjust belt tension
after the first 500 miles (800 km). Adjust tension
at each tire change thereafter.
This procedure involves using the belt tension
gauge, part no. PV-43532, which is designed
specifically for measuring drive belt tension. (You
can also use a Sonic Tension Meter if available).
Before you begin:
•
Make sure the drive system is clean, dry, and
at room temperature (belt and sprockets).
• Be sure suspension is properly adjusted.
• Belt tension must be adjusted at the tightest
spot.
1. Tension Gauge Body
2. Support Base
3. Small O-Ring
4. Plunger
Fig. 1
1
2
3
4
visionownersmanual.book Page 147 Wednesday, February 13, 2008 4:31 PM