beautypg.com

Operation, Stopping the engine – Polaris 2009 Victory Victory Vision User Manual

Page 128

background image

125

OPERATION

Oper

at

ion

Stopping The Engine

Before stopping the engine, bring the motorcycle to a complete stop either in neutral or

with the clutch disengaged. Once the motorcycle is at a complete stop, if it is not already in

neutral, shift into neutral. To stop the engine, set the engine STOP/RUN switch to the

STOP position, turn the ignition switch to the OFF position, and remove the ignition key

.

NOTE:

A momentary clicking noise from the Idle Air Control (IAC) valve is normal when the ignition

key is turned to OFF.

WARNING

• Stopping the engine while the motorcycle is in motion and the transmission is engaged

may damage the engine and the transmission or cause the rear wheel to lose traction. In

either case, you could lose control.

• If the motorcycle is in motion and the engine stops on its own, guide the motorcycle to a

safe location off the road and away from traffic.

visionownersmanual.book Page 125 Wednesday, February 13, 2008 4:31 PM