Grass Valley LUMO Series - Manual (Page 61)

53
LUMO
User Manual
Removing the fiber optic cables
1 Grasp the LC fiber optic connector that is plugged into the SFP module, and pull it straight
out to disengage the optical fiber from the SFP.
• Never pull the fiber optic cable itself, as catastrophic damage may occur.
2 Insert a dust plug into the SFP module.
Removing an SFP module
1 Move the bale clasp lever to the open position.
2 Grasp the SFP module between your thumb and fore-
finger, and pull it straight out of the slot.
Do NOT pull on the bale clasp lever to remove the mod-
ule, as it is easily damaged.
You may find that you need to wiggle the module, or
perhaps push it into the slot a bit, before it will release
and slide out.
3 Insert a dust plug into the SFP module.