Identifica, Tion, Identification – Grass Valley LUMO Series User Manual
Page 32
24
LUMO-CPU-ETH Controller Card
Control Interfaces
Identification
Click the Info button
The LUMO-CPU-ETHcontroller is accessible on
a network, and must be identifiable in order to
function in the iControl environment. The
identification data is entered in the iControl
INFO control panel. This panel also shows
other data that is not user-adjustable.
You can enter the following information by
clicking and typing in the data box:
Label: allows the user to define the label that
identifies this device when it appears in iCon-
trol applications
Short Label: allows the user to define the
short-form label for iControl (8 characters)
Source ID: type a descriptive name for this
LUMO-CPU-ETH controller
Comments: type any desired text
The remaining data boxes show manufacturing information about this card.
Three buttons in the panel give access to other information:
Details: Reports the Firmware version, service version, and panel version for this card
Advanced: Shows the Miranda LongID for this card. The Miranda LongID is the address of this
LUMO-CPU-ETH controller in the iControl network.
Remote System Administration:. Opens the Joining Locators
data box, which lists remote lookup services to which this
LUMO-CPU-ETH is registered.
Add: Force the iControl service for this LUMO-CPU-ETH to
register itself on a user-specified Jini lookup service, using
the following syntax in the data box:
jini://
where